Factory Direct Price Pipeline Sawdust Dryer Biomass Dryer Machine
Product Description
Introduction:
1) Raw materials should be sawdust, suitable for drying the moisture 20-40%; Final moisture 8-12%.
2) Diameter of raw materials: (3- 5mm)
3) Temperature of Hot Air: 180-250 Celsius degree.
4) This sawdust dryer reduces moisture to 8-12% with lower cost consumption and high efficiency.
5) The wood sawdust dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).
| Model |
Power |
Fan |
Capacity |
Input Size |
Input Moisture |
Output Moisture |
Fuel Consumption |
| HGJ-219 |
4kw |
1.5kw |
300-400kg/h |
3-5mm |
25-35% |
8-12% |
10-15kg/h |
| HGJ-325A |
5.5kw |
1.5kw |
500-800kg/h |
3-5mm |
30-40% |
8-12% |
15-20kg/h |
| HGJ-325B |
7.5kw |
1.5kw |
800-1000kg/h |
3-5mm |
35-45% |
8-12% |
25-35kg/h |
Working principle of sawdust pipe dryer:
Wet material is input into the hopper. The stove (boiler) generates hot air which mixes with wet materials and then is sucked into the pipes by exhaust blower (fan) quickly. And then hot air are flowing and going through the curving pipes and buffer(drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock.
Function of wood sawdust dryer:
1.Can guarantee the standard rate of the finished products
2. Can solve the problem for the uneven final particle size.
3.Adopts high technology Reliability Precision
4.unique design.and advanced heating mode by firewood.oil and electricity.
Operating Guide:
1. After installation, start the blower, check the running direction and see if the suction at the material inlet is normal.
2. Tie up a bag whose both ends are open around the outlet of the dust catcher.
3. Feed the raw material to the hopper. Remove or screen out large particles mixed in the material before drying, which will benefit drying speed.
4. Put fuel into the furnace and light it, start the blower. When the air temperature at the outlet of blower gets to 100°C, begin material feeding and drying process.
5. Large piece of the material at dregs-outlet must be removed, which is favorable to feeding.
Packaging & Shipping
Audited Supplier 
){kind=link}