| Customization: | Available |
|---|---|
| Type: | Flat Die Platen Wheel |
| Voltage: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The pipeline sawdust dryer machine is suitable for drying raw material with moisture content less than 20-25%.
If the moisture content of raw material is higher than that, it will need several times of drying to achieve the requested moisture for further briquetting or pelletizing process.
It is suitable for drying sensitive material like sawdust, rice hull, milled wheat straw, milled cotton / corn stalks and so on.
It is made up of heat stove, tube, impulse jar, function tube, fan, and cyclone separator.
It can reduce moisture from 40-45% to 8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so on.
| Model | Power | Fan | Capacity | Input Size | Input Moisture | Output Moisture | Fuel Consumption |
| HGJ-I | 4kw | 1.5kw | 300-400kg/h | 3-5mm | 25-35% | 8-12% | 10-15kg/h |
| HGJ-II | 5.5kw | 1.5kw | 500-800kg/h | 3-5mm | 30-40% | 8-12% | 15-20kg/h |
| HGJ-III | 7.5kw | 1.5kw | 800-1000kg/h | 3-5mm | 35-45% | 8-12% | 25-35kg/h |
1. Can guarantee the standard rate of the finished products
2. Can solve the problem for the uneven final particle size.
3. Adopts high technology Reliability Precision
4. unique design.and advanced heating mode by firewood.oil and electricity.
Working principle of sawdust pipe dryer:
Wet material is input into the hopper. The stove (boiler) generates hot air which mixes with wet materials and then is sucked into the pipes by exhaust blower (fan) quickly. And then hot air are flowing and going through the curving pipes and buffer(drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock.
1) Raw materials should be sawdust, suitable for drying the moisture 20-40%; Final moisture 8-12%.
2) Diameter of raw materials: (3- 5mm)
3) Temperature of Hot Air: 180-250 Celsius degree.
4) This sawdust dryer reduces moisture to 8-12% with lower cost consumption and high efficiency.
5) The wood sawdust dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper.
The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly.
And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).
){kind=link}