Household Lemon Juice Extractor Cold Press Cashew Apple Juice Making Machine
Product Description
Introduction:
1.Used to squeeze pineapple, apple, pear and other fruits;
2.For pressing tomatoes, ginger, garlic, celery and other vegetables.
3.Spiral propulsion;
4.Fully automatic berry, pome fruit and vegetable fruit and vegetable juice extraction and slagging process;
5.The part in contact with the material is made of GB 304 stainless steel.
6.The frame material can be selected from the national standard 304 stainless steel, depending on customer requirements.
Product Parameters
| Model |
Output |
Spiral diameter |
Main Motor |
Crushing motor power |
Filter |
Dimensions |
AG-0.5TG
|
0.5T/H |
88mm |
1.5kw |
1.5kw |
0.6mm |
990*380*1100 |
| AG-1.0TG |
1T/H |
125mm |
3kw |
1.5kw |
0.6mm |
950*350*1200 |
Detailed Photos
1. Structure: It consists of front support, feed hopper, crushing, spiral, filter net, juice extractor, rear support, slag sump, etc.
2. The left end of the spiral main shaft is supported in the rolling bearing housing, and the right end is supported by the hand wheel bearing.
3. In the seat, the motor is driven by a pair of V-belt drive screws.
Working Principle
1. The main component of the equipment is the broken pulp, juice and skin entering the spiral juice extractor through the feeding hopper.
2. The spiral diameter gradually increases along the direction of the slag outlet and the pitch gradually decreases.
3. When the material is spirally advanced, the spiral is caused by the spiral.
4. The volume of the cavity is reduced to form a press of the material.
5. The direction of rotation of the helical main shaft is viewed from the feed hopper toward the slag groove in a clockwise direction.
6. The raw material is added to the feed hopper, pressed under the advancement of the spiral, and the pressed juice flows through the filter into the bottom of the juice extractor, and the waste is discharged through the annular gap formed between the spiral and the tapered portion of the pressure regulation.
7. The movement of the pressure regulating head in the axial direction can adjust the size of the gap.
8. For clockwise (when the seat is turned from the tapping groove of the device to the end of the feed hopper, the head is turned to the left, the gap is reduced, and the gap is enlarged.)
9. The size of the gap is changed, that is, the row is adjusted. The resistance of the slag.
10. The slag removal rate can be changed, but if the void is too small, under strong extrusion, some of the slag particles will be extruded through the filter together with the juice.
11. Although the juice is increased, the quality of the juice is relatively decreased, and the size of the void should be regarded as User specific process requirements.
12. Stainless steel spiral fruit and vegetable juice extractor is suitable for a variety of fresh fruit and vegetable beating separation.
Features of juice machine:
1.The motor drives the spindle to rotate through a pair of pulleys.
2.The tripod is mounted on the spindle. The beater plate is on the tripod.
3.The screen, funnel and slag are mounted on the lower bracket.
4.The upper inner cylinder and the feeding hopper are loaded on the bracket, and the entire upper bracket is hingedly connected, and can be opened to check the quality of the pulp.
Packaging & Shipping
Audited Supplier 
){kind=link}