| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | Roller Diameter (m) |
Roller Length (m) | Output (T/H) | Temperature of feeding air (ºC) | Input Size (mm) | Input Moisture (%) | Output Moisture (%) |
| 6GT-800 | 0.8 | 10 | 0.5 | 270±30ºC | 3-8mm | 20-40 | 8-12 |
| 6GT-1000 | 1.0 | 10 | 0.6-0.8 | 270±30ºC | 3-8mm | 20-40 | 8-12 |
| 6GT-1200 | 1.2 | 10 | 1-1.2 | 270±30ºC | 3-8mm | 30-45 | 8-12 |
| 6GT-1500 | 1.5 | 10 | 1.5-1.8 | 270±30ºC | 3-8mm | 35-50 | 8-12 |
Application of Sawdust Rotary Dryer:
The rotary dryer can be widely used in the following industries: straw press briquettes fuel, charcoal machinery, wood chip granule fuel, sawdust press blocks, farming and animal husbandry engineering industry;
it is able to dry agricultural cellulosic-based materials such as: corn straw, soybean straw, cotton straw, wheat straw, sorghum straw, wood chips, wood shaving, sawdust drying, ginkgo leaf drying and mulberry leaves drying, etc.
How does the Sawdust Rotary Dryer Works?
The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence.
The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The dryer cylinder with slight inclination with the horizontal line.
The materials enter from the higher end, and the heat carrier enters from the lower ender; the two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material.
Along with the rotation of cylinder, the materials run to the lower end due to gravity. In the forward movement of wet materials in the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.
Rotary Cylinder:
Heating Stove:
Airlock:
Exhaust Fan:
){kind=link}