Industrial Fruit and Vegetable Screw Juice Extractor Machine with High Quality

• After-sales Service: Online Service
• Warranty: 12 Months
• Type: Cutter
• Voltage: 380V
• Power: 1.5KW
• Customized: Customized
• Model NO.: AG-0.5T; AG-1.0T; AG-1.5T
• Transport Package: Wooden Case
• Specification: 780*380*800
• Trademark: AG Mach
• Origin: China
• Production Capacity: 20 Sets Per Month

Product Description

Product Description

 

Industrial Fruit and Vegetable Screw Juice Extractor Machine with High Quality

 Use and scope of application:
     The screw juicer extractor is widely use in various fruits and vegetables, such as carrots, tomatoes, pineapples, pears, apples,   oranges, etc. It can be used in fruit processing industry, food and beverage processing plants and restaurants.The frame material   can be selected from the national standard 304 stainless steel, depending on customer requirements.

Structure:
    It consists of front support, feed hopper, crushing, spiral, filter net, juice extractor, rear support, slag sump, etc. The left end of the spiral main shaft is supported in the rolling bearing housing, and the right end is supported by the hand wheel bearing. In the seat, the motor is driven by a pair of V-belt drive screws.

 

Product Parameters

Technical Data of juice extractor:

Specification	Output	Spiral diameter	Crushing motor power	Main motor power	Filter	Dimensions
AG-0.5TG	0.5T/H	88mm	1.5kw	1.5kw	0.6mm	990*380*1100
AG-0.5T	0.5T/H	88mm	/	1.5kw	0.6mm	780*380*800
AG-1.0TG	1.0T/H	125mm	1.5kw	3kw	0.6mm	950*350*1200
AG-1.0T	1.0T/H	125mm	/	3kw	0.6mm	909*320*833
AG-1.5TG	1.5T/H	175mm	2.2kw	7.5kw	0.6mm	1400*550*1700
AG-1.5T	1.5T/H	175mm	/	7.5kw	0.6mm	1400*500*1380

 

Working Principle

 

Working principle of juicer:

1. The main component of the equipment is the broken pulp, juice and skin entering the spiral juice extractor through the feeding    hopper.
2. The spiral diameter gradually increases along the direction of the slag outlet and the pitch gradually decreases.
3. When the material is spirally advanced, the spiral is caused by the spiral.
4. The volume of the cavity is reduced to form a press of the material.
5. The direction of rotation of the helical main shaft is viewed from the feed hopper toward the slag groove in a clockwise direction.
6. The raw material is added to the feed hopper, pressed under the advancement of the spiral, and the pressed juice flows
through the filter into the bottom of the juice extractor, and the waste is discharged through the annular gap formed between the spiral and the tapered portion of the pressure regulation.
7. The movement of the pressure regulating head in the axial direction can adjust the size of the gap.
8. For clockwise (when the seat is turned from the tapping groove of the device to the end of the feed hopper, the head is turned to the left, the gap is reduced, and the gap is enlarged.)
9. The size of the gap is changed, that is, the row is adjusted. The resistance of the slag.
10. The slag removal rate can be changed, but if the void is too small, under strong extrusion, some of the slag particles will be  extruded through the filter together with the juice.
11. Although the juice is increased, the quality of the juice is relatively decreased, and the size of the void should be regarded as User specific process requirements.
12. Stainless steel spiral fruit and vegetable juice extractor is suitable for a variety of fresh fruit and vegetable beating separation.

Preparation

1. Stabilize the machine on the foundation and tighten the chassis foot screws;

2. Open the cylinder, clean up the debris, and clean it. When cleaning, be careful not to let the water leak on the motor;

3. Adjusting the gap between the scraper and the inner wall of the screen as 1.5~2mm;

4. Adjust Scraper helix angle; Rotate the spindle by hand to check whether it is flexible, and close the upper cylinder tightening screw.

 

 

Detailed Photos

 

 

 

 

Packaging & Shipping